View APL5833-28EC-TR_8503561.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 1 anpec reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. 300ma low dropout linear regulator of fixed 2.85v,3.3v and 3.5v features general description the apl5833 is a 3-pin low dropout linear regulator with 2.0% accuracy of output voltage over line, load and temperature variations. dropout voltage at 300ma output current is less than 1.2v. both output current limiting and thermal shutdown are built in to provide maximal protection to the apl5833 against fault conditions. the over current and thermal shut- down circuits become active when the current ex- ceed 300ma, or the junction temperature reach 150 c. normal operation is recovered when junction temperature drops below 130 c. applications ? ? ? ? ? low dropout voltage of 1.2v at 300ma ? ? ? ? ? output voltage accuracy 2.0% ? ? ? ? ? line regulation - 1mv (typ.) ? ? ? ? ? load regulation - 6mv (typ.) ? ? ? ? ? input voltage range up to 9v ? ? ? ? ? internal current limiting and thermal shut- down protections ? ? ? ? ? available output voltages - 2.85v, 3.3v and 3.5v ? ? ? ? ? various sot-89 and to-92 packages avail- able ? voltage regulator for cd-rom drivers ? voltage regulator for lan cards ? wireless communication systems ? portable instrument ? portable consumer equipment ? low voltage systems v out v in gnd 1 2 3 to-92 (top view) sot-89 (top view) v out v in gnd 2 13 pin configuration
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 2 package code d : s o t -8 9 e : t o -9 2 tem p. range c : 0 to 70 c handling code tu : tube tr : tape & reel voltage code 28 : 2.85v 33 : 3.3v 35 : 3.5v blank : adjustable version apl5833- handling code tem p. range package code voltage code xxxxx - date code apl5833 -33 e : apl5833 -33 d : apl5833 -28 d : xxxxx - date code apl5833-28 e : apl5833 d : apl 5833 xxxxx xxxxx - date code apl5833 e : xxxxx - date code apl5833 -35 e : apl5833 -35 d : apl5833 xxxxx33 xxxxx - date code apl5833 xxxxx28 xxxxx - date code apl5833 xxxxx xxxxx - date code apl5833 xxxxx35 xxxxx - date code apl 5833 xxxxx28 apl 5833 xxxxx33 apl 5833 xxxxx35 ordering and marking information block diagram v out thermal shutdown v in gnd current limit v ref + - absolute maximum ratings symbol parameter rating unit v in input voltage 9 v i out output current 450 ma t a operating ambient temperature range 0 to 70 c t j operating junction temperature range -40 to +150 c t stg storage temperature range -65 to +150 c sot-89 550 p d power dissipation package to-92 550 mw sot-89 180 ja thermal resistance to-92 180 c / w 300
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 3 electrical characteristics (t a =25 c, unless otherwise noted) apl5833 symbol parameter test conditions min. typ. max. unit v in input voltage v out +1.2v 9 v v out output voltage i out =10ma 0.98 v out 1.02 v out v i out output current capability v out =3.3v, ? v out =2% 300 ma i sc short circuit current v out < 0.4v 500 ma i q quiescent current v in =5v, no load 6 10 ma reg line line regulation i out =10ma, v in = 5v to 8v 1 6 mv reg load load regulation i out =1ma~300ma 6 12 mv v dropout dropout voltage i out =300ma, ? v out =1% 1200 1300 mv psrr power supply rejection ratio at 1khz 55 db ots over temperature shutdown 150 c e n output noise 100 vrms tc output voltage temperature coefficient 100 ppm/c fixed 2.85, 3.3v and 3.5v regulator application schematic r1 r2 r1 1.250v v out + = v in 1 f v out + r1 r2 apl5833 out in adj + 10 f v in v out apl5833 out in gnd 1 f 10 f 1.25v to 7v adjustable regulator
copyright ? anpec electronics corp. rev. a.7 - apl., 2001 apl5833 www.anpec.com.tw 4 typical characteristics 0 1 2 3 4 5 6 -5 0 5 10 15 20 25 v in v out 0 102030405060708090100 -10 0 10 20 0 1 2 3 4 5 6 0 102030405060708090100 v in v out -200 200 600 1000 1400 1800 -10 -5 0 5 10 15 20 25 30 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2 0.3 0.4 v in v out 0.5 1.5 2.5 3.5 1ma 10ma 300ma 50ma 3 2 2.5 3.5 4 4.5 5 1 2 3 output voltage (mv) input voltage (v) line transient response time (ns) output voltage (mv) input voltage (v) time (ns) time (ns) output voltag (v) load transient response output current (a) output voltage vs. input voltage input voltage (v) (c l =1 f, i out =1ma) line transient response (c l =10 f, i out =10ma) (c l =10 f, v in =5v)
copyright ? anpec electronics corp. rev. a.7 - apl., 2001 apl5833 www.anpec.com.tw 5 typical characteristics (cont.) short current (ma) output voltage (v) short current vs. input voltage output voltage vs. output current output current (ma) input voltage (v) 02 4 6 810 0 100 200 300 400 500 600 700 0 100 200 300 3.35 3.33 3.31 3.29 3.27 3.25 output voltage vs. input voltage input current vs. input voltage output voltage (v) input current (ma) input voltage (v) input voltage (v) 0 1 2 3 4 5 6 7 8 0246810 3.25 3.35 5678 910 3.33 3.31 3.29 3.27
copyright ? anpec electronics corp. rev. a.7 - apl., 2001 apl5833 www.anpec.com.tw 6 1060 1080 1100 1120 1140 1160 1180 1200 1220 1240 0 50 100 150 200 250 300 typical characteristics (cont.) -50 0 50 100 150 480 490 500 510 520 530 540 550 dropout voltage (mv) dropout voltage vs. output current output current (ma) short current (ma) short current vs. temperature temperature ( c) 0 1 2 3 4 5 6 7 8 9 -50 0 50 100 150 -50 0 50 100 150 3.26 3.25 3.27 3.28 3.29 3.30 3.31 3.32 3.3 3.34 3.35 output voltage vs. temperature input current vs. temperature output voltage (v) temperature (c) short current (ma) temperature ( c)
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 7 packaging information b2 l1 q l2 a b l seating plane e1 e j e s d 1 2 3 s millimeters inches dim min. max. min. max. a 4.58 5.33 0.170 0.210 b 0.41 0.53 0.160 0.021 b2 0.41 0.48 0.160 0.019 d 4.96 5.20 0.175 0.205 e 3.94 4.19 0.125 0.165 e 2.42 2.66 0.095 0.105 e1 1.15 1.39 0.045 0.055 j 3.43 0.135 l 12.70 0.500 l1 1.27 0.050 l2 6.35 0.250 q 2.93 0.115 s 2.42 2.66 0.080 0.105 to-92
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 8 packaging information d d1 e b1 e1 b 12 3 l h e c a a a sot-89 (reference eiaj ed-7500a reg stration sc-62) millimeters inches dim min. max. min. max. a 1.40 1.60 0.055 0.063 b 0.40 0.56 0.016 0.022 b1 0.35 0.48 0.014 0.019 c 0.35 0.44 0.014 0.017 d 4.40 4.60 0.173 0.181 d1 1.35 1.83 0.053 0.072 e 1.50 bsc 0.059 bsc e1 3.00 bsc 0.118 bsc e 2.29 2.60 0.090 0.102 h 3.75 4.25 0.148 0.167 l 0.80 1.20 0.031 0.047 10 10
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 9 reference jedec standard j-std-020a april 1999 reflow condition (ir/convection or vpr reflow) physical specifications pre-heat temperature 183 c peak temperature time temperature terminal material solder-plated copper (solder material : 90/10 or 63/37 snpb) lead solderability meets eia specification rsi86-91, ansi/j-std-002 category 3. convection or ir/ convection vpr average ramp-up rate(183 c to peak) 3 c/second max. 10 c /second max. preheat temperature 125 25 c) 120 seconds max. temperature maintained above 183 c 60 ~ 150 seconds time within 5 c of actual peak temperature 10 ~ 20 seconds 60 seconds peak temperature range 220 +5/-0 c or 235 +5/-0 c 215~ 219 c or 235 +5/-0 c ramp-down rate 6 c /second max. 10 c /second max. time 25 c to peak temperature 6 minutes max. pkg. thickness 2.5mm and all bags pkg. thickness < 2.5mm and pkg. volume 350 mm pkg. thickness < 2.5mm and pkg. volume < convection 220 +5/-0 c convection 235 +5/-0 c vpr 215-219 c vpr 235 +5/-0 c ir/convection 220 +5/-0 c ir/convection 235 +5/-0 c classification reflow profiles
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 10 test item method description solderability mil-std-883d-2003 245 c , 5 sec holt mil-std-883d-1005.7 1000 hrs bias @ 125 c pct jesd-22-b, a102 168 hrs, 100 % rh , 121 c tst mil-std-883d-1011.9 -65 c ~ 150 c , 200 cycles esd mil-std-883d-3015.7 vhbm > 2kv, vmm > 200v latch-up jesd 78 10ms , i tr > 100ma reliability test program carrier tape & reel dimensions a j b t2 t1 c t ao e w po p ko bo d1 d f p1 application a b c j t1 t2 w p e sot-89 178 1 70 2 13.5 0.15 3 0.15 14 2 1.3 0.3 12 + 0.3 12 - 0.1 8 0.1 1.75 0.1 application f d d1 po p1 ao bo ko t sot-89 5.5 0.05 1.5 0.1 1.5 0.1 4.0 0.1 2.0 0.1 4.8 0.1 4.5 0.1 1.80 0.1 0.3 0.013 (mm)
copyright ? anpec electronics corp. rev. b.1 - apr., 2003 apl5833 www.anpec.com.tw 11 cover tape dimensions customer service anpec electronics corp. head office : 5f, no. 2 li-hsin road, sbip, hsin-chu, taiwan, r.o.c. tel : 886-3-5642000 fax : 886-3-5642050 taipei branch : 7f, no. 137, lane 235, pac chiao rd., hsin tien city, taipei hsien, taiwan, r. o. c. tel : 886-2-89191368 fax : 886-2-89191369 application carrier width cover tape width devices per reel sot- 89 12 9.3 1000

▲Up To Search▲

Price & Availability of APL5833-28EC-TR

	To Download APL5833-28EC-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .